Small face towel: a U-shaped format of 35 × 50 cm
The small face towel is distinguished by a central cut-out that divides the bottom of the textile into two panels. It measures approximately 35 cm wide by 50 cm long, while the opening goes up nearly 20 cm. This geometry allows it to be placed around the face without folding an entire piece over the nose or mouth.
One unit is included in the selected variant. Two colors are available: White and Gray. The announced composition combines 80% polyester fibers with 20% polyamide. The surface is described as woven and looped, with a visually velvety feel on both models.
-
Measurements: approximately 35 × 50 cm.
-
Opening: central slit of approximately 20 cm.
-
Content: one white or gray piece.
-
Composition: 80% polyester and 20% polyamide announced.
Around the face during a lying-down treatment
Place the full part under the head and let the two panels hang down on each side. Always ensure that the nose and mouth remain completely clear.
On a suitable headrest support
Center the slit before you settle in, then smooth the textile to avoid a bulge under the neck or against a cheek.
Understand the shape before choosing
Unlike a classic small rectangular towel, this model has a clear opening starting from the lower edge. The 35 cm width covers the area under the head, while the 50 cm accompanies the top of the shoulders depending on the positioning. The upper corners are rounded and the contours have a regular finish visible in the photographs.
The 20 cm measurement refers to the length of the cut-out and not the total width. As with any textile, a slight variation may result from manual measurement. Before purchasing, compare the 35 × 50 cm to your cushion, treatment table, or planned storage space.
Test the flat orientation before first use
Place the towel on a clean surface, with the opening facing you. This simple check helps to immediately identify the part intended to surround the face area.
| Element |
Announced Data |
To remember |
| Dimensions |
Approximately 35 × 50 cm |
Rectangular shape with rounded corners |
| Cut-out |
Approximately 20 cm |
Central opening from the edge |
| White |
1 piece |
Light shade |
| Gray |
1 piece |
Dark shade |
| Material |
80% polyester, 20% polyamide |
Woven looped surface type |
Using a towel dedicated to facial care
The white color provides a bright presentation and allows quick detection of traces of tinted products. Gray offers a darker contrast and a understated look. This choice remains aesthetic: both variants have the same measurements, the same composition, and each includes one piece.
Provide a clean piece for each session
After contact with skin or a cosmetic product, set the towel aside for washing. Do not refold it while still damp into a pile intended for future use.
Washing and drying microfiber correctly
Machine washing is announced, and the sewn label guides the program selection. Sort whites and grays if the instructions require it, dose detergent according to your machine, and preserve the texture by following the recommendations specific to polyester and polyamide.
After the cycle, unfold the two panels so that the edges of the slit dry without remaining superimposed. A wide hanger or flat drying keeps the opening accessible to the air. Wait until the central part, seams, and looped areas are dry before storing the item.
The U-shape facilitates positioning around the treatment area. After each session, fully open the two panels, inspect the central slit, then place the towel in the wash. Rotating between several pieces ensures that a clean and perfectly dry textile is always prepared.
Keep the face completely clear
Center the cut-out before settling in and ensure that the eyes, nose, and mouth remain accessible throughout the session. Remove the towel immediately if its positioning becomes uncomfortable.
Five precise answers about this U-shaped care textile
Discover Maison Orea Face Towels
